Frequently asked questions

Everything you need to know about microcement, installation and aftercare.

About microcement

What is microcement?

Microcement is a decorative, cement-based coating that creates a seamless, contemporary finish across floors, walls and other surfaces. It can transform existing spaces without structural changes or demolition.

Where can microcement be applied?

Floors, walls, bathrooms, wet rooms, kitchens, staircases and selected furniture, in both residential and commercial settings, subject to suitable substrate conditions and a technical assessment.

Suitability

Can microcement be applied over existing tiles?

Yes. One of the main advantages of microcement is that it can often go directly over existing tiles, as long as they are in good, stable condition and properly prepared. This avoids removing the tiles, which reduces cost, mess and disruption while giving you a completely new seamless finish. We assess the substrate and apply the reinforcement and bonding layers needed for a durable result.

Is microcement suitable for showers and wet rooms?

Yes. We have installed microcement in many bathrooms, wet rooms and showers. Our wet-area system adds an epoxy moisture layer under the finish and a sealed surface on top, designed to keep water out when correctly installed. Careful substrate preparation and detailing around joints and drains are essential for a reliable, long-lasting result.

Is microcement compatible with underfloor heating?

Yes. Microcement works with or without underfloor heating. Its thin build-up makes it well suited to heated floors, provided the heating system and substrate have been correctly prepared and commissioned before installation.

Can microcement be used outdoors?

Yes, on selected external surfaces, including façades and external walls, depending on the substrate and exposure. It is not a substitute for a specialist roofing system and is not recommended as a roof covering.

Is microcement suitable for high-traffic areas?

Yes. With professional installation, microcement gives a durable finish in busy residential and commercial spaces. For areas with heavier wear, such as garages or demanding commercial spaces, we recommend a reinforced build-up and protective finish suited to the use.

Can microcement crack?

As with any decorative coating, the stability and condition of the substrate underneath are essential. We put particular care into preparation and reinforcement, including fibreglass mesh where required, to minimise the risk of cracking. Structural movement or defects in the substrate can still affect the finished surface.

Installation

How thick is microcement?

A complete installation has a total build-up of about 2 to 3 mm, including the preparation, decorative and protective layers. This makes it an excellent choice for renovations where existing floor levels need to stay the same.

How long does installation take?

A typical installation takes 5 to 7 working days, depending on the size of the project, the condition of the substrate and the preparation needed. More complex projects can take longer. We confirm the schedule with you before work begins.

How soon can I use the surface after installation?

Microcement needs time to cure. As a general guide: keep off freshly finished surfaces for at least 72 hours; avoid water in wet areas for about 5 to 7 days; avoid cleaning products for the first 10 days; full cure takes about 30 days. We give you specific aftercare instructions when the work is complete.

Working with us

Is there a minimum project size?

Yes. Our minimum installation is 30 m² in London and 50 m² outside London. For furniture-only projects, the minimum is 20 m². If your area is smaller, you may wish to include other surfaces in your project.

Do you offer technical site visits?

Yes. Our technical consultants visit to assess the substrate, discuss your requirements and recommend the best approach. Site visits are £180 plus VAT, deducted from your final invoice if you go ahead with your project.

Book a site visit

Do you supply microcement materials only?

Yes. We supply materials for supply-only projects, with a minimum order of £1,200. Our team can help you choose the right products for your application.

Is microcement easy to maintain?

Yes. Its seamless surface has no grout lines, which makes it easy to keep clean. Clean regularly with suitable, non-abrasive products and avoid harsh chemicals that could damage the protective sealer. We also supply Microcement Cleaner and Microcement Wax to help maintain and protect your surfaces.

Ready to start your project?

Tell us about your project and we’ll come back with a quote.

CallWhatsApp (opens in a new tab)Quote